Motherboard Form Factors Explained: ATX vs Micro-ATX vs Mini-ITX
ATX, Micro-ATX, Mini-ITX and E-ATX all fit different cases, slots and RAM capacities. Here are the exact dimensions, slot counts and buying rules for each, plus how to check what you already own.
A motherboard's "form factor" is just its physical size and screw-hole layout — and that one spec quietly decides which case it fits, how many expansion slots and RAM slots it has room for, and which power supply shape you need. The four form factors you'll see while shopping are ATX (305 × 244 mm, the mainstream full-size standard), Micro-ATX (up to 244 × 244 mm, a smaller board that keeps most ATX features), Mini-ITX (170 × 170 mm, built around a single expansion slot), and E-ATX (a looser "bigger than ATX" category, usually somewhere between 305 × 277 mm and 305 × 330 mm). None of them tells you anything about CPU speed or gaming performance — they're sizing and compatibility specs, not performance tiers, so don't let a bigger board talk you into paying for size you don't need.
- ATX — 305 × 244 mm · up to 7 expansion slots · 4 DIMM slots on most boards
- Micro-ATX — up to 244 × 244 mm · up to 4 expansion slots · up to 4 DIMM slots
- Mini-ITX — 170 × 170 mm · 1 expansion slot · 2 DIMM slots
- E-ATX — no single fixed size (commonly 305 × 277 mm to 305 × 330 mm) · up to 7 expansion slots · 4 to 8 DIMM slots on workstation boards
What a motherboard form factor actually controls
The ATX specification was introduced by Intel in July 1995 as a replacement for the older AT layout, and it did more than set a board size — it fixed the screw-hole positions, the location of the rear I/O panel, and the motherboard power-connector layout that the rest of the industry still builds around. Every smaller or larger format that followed, from Micro-ATX down to Mini-ITX and up to E-ATX, was designed to reuse as much of that original mounting grid as possible, which is why a case built for ATX usually has a standoff pattern that also lines up with Micro-ATX and Mini-ITX boards. The practical upshot: form factor is a compatibility question first and a features question second. A smaller board from the same chipset generation typically runs the same CPU and the same memory speeds as its full-size sibling — it just has fewer slots to plug things into.
ATX: full-size, and still the default
Standard ATX measures 305 × 244 mm (12 × 9.6 in). The specification allows for up to seven expansion-slot openings along the rear panel, though Wikipedia's ATX entry notes most common ATX boards only populate six of them. On the memory side, four DIMM slots is the norm for mainstream ATX boards: ASUS's ROG Strix X670E-A Gaming WiFi spec sheet, a representative full-size AM5 board, lists exactly that — 4 DIMM slots for up to 192 GB of DDR5, alongside a PCIe 5.0 x16 slot from the CPU plus PCIe 4.0 x16 and x1 slots from the chipset. ATX remains the default recommendation for most desktop builds simply because it has the most model choice at every price point and the most room to add a second GPU, extra M.2 heatsinked slots, or a dedicated sound/capture card down the line.
Micro-ATX: same chipset, smaller board
Micro-ATX (often written mATX) was finalized in December 1997 as a compact alternative that keeps the ATX rear I/O and mounting-hole layout but caps the board at a 244 × 244 mm square — some boards sold as Micro-ATX are even smaller, around 244 × 205 mm. The specification tops out at four expansion slots. ASUS's own PRIME B760M-PLUS tech-spec page is a good real-world example: it's listed at 9.6 × 9.6 in (24.4 × 24.4 cm), with 4 DDR5 DIMM slots (up to 192 GB) and three expansion-slot openings — a PCIe 4.0 x16 from the CPU, plus a PCIe 4.0 x16 (x4 electrical) and a PCIe 4.0 x1 from the B760 chipset. That's nearly the same slot and memory configuration as many full ATX boards on the same chipset; you're mainly trading one or two rear expansion openings and a smaller PCB for a noticeably smaller case footprint.
Mini-ITX: one slot, by design
Mini-ITX is the smallest mainstream form factor at 170 × 170 mm (6.7 × 6.7 in), introduced by VIA Technologies, which released its Mini-ITX reference design in November 2001 as a format for ultra-compact and embedded systems before it caught on with DIY builders. By spec, a Mini-ITX board has exactly one expansion slot — almost always used for a graphics card — and typically two DIMM slots rather than four. ASUS's ROG Strix B860-I Gaming WiFi spec page confirms the pattern for a current board: 6.7 × 6.7 in (17 × 17 cm), one PCIe 5.0 x16 slot, and 2 DDR5 DIMM slots supporting up to 128 GB. Because the format allows only one slot and two memory slots no matter which chipset it's built on, picking Mini-ITX is really a decision to prioritize desk space over future expansion.
E-ATX: bigger boards for bigger builds — but not a fixed size
Here's the part buyers trip over most: unlike ATX, Micro-ATX and Mini-ITX, "E-ATX" (Extended ATX) was never locked down as a single, enforced spec. Different manufacturers ship boards of different depths under the same E-ATX label — anywhere from around 305 × 257 mm up to 305 × 330 mm — and that 305 × 330 mm figure also happens to be the separate SSI-EEB workstation standard, whose mounting holes don't fully match ATX even though the outer dimensions are identical. In practice, "E-ATX" mostly just means "wider than standard ATX, built for extra DIMM slots or a second full-length PCIe slot." ASUS's ROG Crosshair X870E Extreme, for example, is listed as E-ATX at 12 × 10.9 in (30.5 × 27.7 cm) with 4 DDR5 DIMM slots (up to 256 GB) and two PCIe 5.0 x16 slots. Go up to genuine workstation hardware, like ASUS's Threadripper Pro-class Pro WS WRX90E-SAGE SE, and the same general size class carries 8 DIMM slots for 8-channel ECC memory instead of 4. Because the dimensions aren't fixed, a case advertising "E-ATX support" is not a guarantee that any given E-ATX board will fit — always check the case's stated maximum motherboard depth in millimeters against the specific board you're buying, not just the label on the box.
Motherboard form factors compared
Here's the full-size, slot-count and memory-slot comparison in one place:
| Form factor | Dimensions | Max expansion slots | Typical RAM slots | Typical use case |
|---|---|---|---|---|
| Mini-ITX | 170 × 170 mm (6.7 × 6.7 in) | 1 | 2 DIMM | Small-form-factor desktops, HTPCs, compact builds |
| Micro-ATX | Up to 244 × 244 mm (9.6 × 9.6 in) | 4 | Up to 4 DIMM | Budget-to-midrange builds in compact mid-tower cases |
| ATX | 305 × 244 mm (12 × 9.6 in) | 7 (6 typical) | 4 DIMM on most boards | Mainstream-to-high-end desktops, most flexible option |
| E-ATX | No fixed standard; commonly 305 × 277 mm to 305 × 330 mm | Up to 7, varies by board | 4 DIMM on consumer boards, up to 8 DIMM on workstation boards | High-end gaming, workstation and HEDT builds needing extra room |
Matching a case and power supply to each form factor
Form factor compatibility runs in one direction: a case rated for a larger board will almost always accept the smaller ones that share its mounting grid, but not the other way around.
- ATX and Micro-ATX: both fit in any standard ATX mid-tower or full-tower case, since Micro-ATX reuses the top portion of the ATX hole pattern. Either pairs with a standard ATX power supply, which the ATX12V specification sets at 150 × 86 × 140 mm (with deeper 160–230 mm variants common at higher wattages), using the familiar 24-pin motherboard connector and an 8-pin (or 4+4-pin) CPU connector.
- Mini-ITX: needs a small-form-factor case built specifically around its 170 × 170 mm footprint. Most Mini-ITX cases are too small to fit a full ATX power supply at all, so they're designed around the smaller SFX (or longer SFX-L) format instead. Cooler Master's own PSU sizing guide puts that difference in concrete terms — a standard ATX unit at 150 × 86 × 140 mm versus an SFX unit at 125 × 63.5 × 100 mm — and states plainly that Mini-ITX cases are simply too small for ATX PSUs, making an SFX unit necessary rather than optional for most small-form-factor builds.
- E-ATX: still uses a standard ATX-size power supply, but needs a case explicitly rated for that board's exact depth, plus clearance for the extra DIMM slots and VRM heatsinks common on wider boards. The bigger PCB can also eat into space you'd normally use for cable routing or front-panel drive cages, so check the case maker's motherboard-tray spec sheet rather than assuming "E-ATX" on the box is enough. If you're also planning a liquid-cooling loop around a full-size ATX or E-ATX board, our AIO liquid cooling buyer's guide covers radiator sizing for those larger towers.
How to check what form factor your board or case already supports
If you're upgrading rather than building from scratch, you don't need to guess:
- Read the board itself. Most motherboards print their model name directly on the PCB, usually near a DIMM slot or the rear I/O shield. Searching that model number on the manufacturer's own spec page (ASUS, MSI, Gigabyte and ASRock all publish a "Form Factor" field) gives you an instant, authoritative answer.
- Check the case's "motherboard support" spec. Case manufacturers list every form factor a case accepts, plus a maximum motherboard size in millimeters — this is the only reliable way to confirm E-ATX clearance, since the label alone doesn't guarantee a fit.
- Count the rear expansion-slot brackets. Eight or nine slot brackets on the back of a case usually indicates ATX or E-ATX clearance, four typically means Micro-ATX, and a single bracket (occasionally two) means Mini-ITX.
- Measure the board if all else fails. A square board around 17 cm per side is Mini-ITX, a square board around 24.4 cm per side is Micro-ATX, and a rectangular board roughly 30.5 cm wide is either ATX or E-ATX depending on its depth.
Which form factor should you actually buy?
As a starting point: ATX is the safe default if you're not sure what you need — it has the widest model selection, the most expansion room, and generally the best features-per-dollar. Micro-ATX is worth choosing if you want a smaller case without giving up chipset features, as long as you're fine with one or two fewer expansion slots. Mini-ITX makes sense when desk space matters more than future upgrades — just budget for an SFX power supply and expect a modest size-and-cost premium on the board itself. E-ATX is worth the extra footprint only if you specifically need more than four DIMM slots, a second full-length PCIe slot, or a workstation-class chipset; most gaming builds don't actually need the extra size, so confirm your case's exact maximum board depth before buying one.
What's next
Once form factor is settled, the next two decisions that actually affect day-to-day performance are cooling clearance and power delivery — a bigger board doesn't make a system faster, but it does change how much radiator, cable and airflow room you have to work with. From here, it's worth comparing specific board models within your chosen size class on the manufacturer's own spec pages, since expansion-slot and DIMM-slot counts can vary between models even within the same form factor and chipset generation.
Frequently asked questions
What is the main difference between ATX and Micro-ATX motherboards?
Size and expansion room. Standard ATX measures 305 x 244 mm with up to 7 expansion-slot openings, while Micro-ATX tops out at a 244 x 244 mm square with a maximum of 4 expansion slots. Both formats typically use 4 DIMM memory slots and the same mounting-hole layout, so a Micro-ATX board fits in most ATX cases.
Can a Mini-ITX motherboard fit in a case built for ATX?
Usually yes for the mounting holes, since Mini-ITX reuses part of the ATX screw pattern, but most people instead buy a dedicated small-form-factor case sized for Mini-ITX's 170 x 170 mm footprint. A Mini-ITX board only has one expansion slot and two DIMM slots, so there is no benefit to putting one in a full ATX tower unless you specifically want the extra case volume for cooling.
Is E-ATX an official standard like ATX or Micro-ATX?
Not in the same way. ATX, Micro-ATX and Mini-ITX each have a single fixed dimension, but E-ATX boards from different manufacturers range from roughly 305 x 257 mm up to 305 x 330 mm under the same label. Always check a case's stated maximum motherboard depth against the exact board you're buying rather than relying on an 'E-ATX compatible' label alone.
How many RAM slots does each motherboard form factor have?
Mini-ITX boards typically have 2 DIMM slots, Micro-ATX and standard ATX boards typically have 4 DIMM slots, and E-ATX boards range from 4 DIMM slots on consumer gaming boards up to 8 DIMM slots on workstation-class boards built for 8-channel ECC memory.
How do I check what motherboard form factor I currently have?
Look up your motherboard's exact model number (usually printed on the board near a DIMM slot or the rear I/O panel) on the manufacturer's own spec page, which lists a 'Form Factor' field. If you no longer have the model number, measure the board: roughly 17 cm square is Mini-ITX, roughly 24.4 cm square is Micro-ATX, and a 30.5 cm-wide rectangular board is ATX or E-ATX depending on depth.
Do Mini-ITX builds need a special power supply?
Most do. Mini-ITX cases are generally too small to fit a full-size ATX power supply (150 x 86 x 140 mm), so they're built around the smaller SFX format (125 x 63.5 x 100 mm) or the longer SFX-L variant instead. Check your specific case's supported PSU format before buying one.
Sources
- Wikipedia: ATX (specification history and dimensions)en.wikipedia.org
- Wikipedia: MicroATXen.wikipedia.org
- Wikipedia: Mini-ITXen.wikipedia.org
- ASUS: PRIME B760M-PLUS tech specs (Micro-ATX example)asus.com
- ASUS: ROG Crosshair X870E Extreme specs (E-ATX example)rog.asus.com
- Cooler Master: What Is an SFX PSU?coolermaster.com
Mara Lindqvist edits the hardware desk. She covers graphics cards, processors, memory and storage, the foundries and chip designers behind them, and what the numbers on a spec sheet mean for people choosing a PC. Specifications in her stories come from manufacturer spec pages and datasheets.

